Flagpole Parts (9)

Phoenix Flagpole Freedom Rings – 360° Swivel Flag Attachment Keep your flag flying free and untangled with Phoenix Flagpole Freedom Rings, the 360° swivel flagpole hardware designed for Phoenix Telescoping Flagpoles and any flagpole with matching dimensions. Made from impact-resistant Lexan® polycarbonate plastic, these rings allow your flag to rotate 360° in the wind, preventing wrapping, tearing, and premature wear. Product Features & Specifications Material: High-strength Lexan® polycarbonate plastic for weather resistance and durability Sizes Available: Small & Double Swivel Rings – 1 ¾" inside diameter Large Swivel Ring – 2 ¼" inside diameter Colors: Black Bronze, Light Bronze/Gold, Silver – match your Phoenix Flagpole finish 360° Freedom Rotation: Keeps flags flying freely without tangling or twisting Dual Flag Capability: Double swivel ring system allows for multiple flag display or proper half-staff positioning Universal Compatibility: Fits all Phoenix Telescoping Flagpoles (15', 20', 25') and other telescoping poles with matching diameters Lifetime Warranty: Covered under Atlantic Flag & Pole's exclusive Lifetime Guarantee Installation Instructions Lower or collapse your Phoenix Telescoping Flagpole until you reach the section where you want to attach your Freedom Ring Pry open the Freedom Ring at the flag snap eyelet and slide the ring over the flagpole tube section until it clasps shut securely Attach the stainless steel flag snap: Press the spring clip of the stainless steel snap over the Freedom Ring's eyelet until it snaps firmly into place Clip your flag grommet onto the flag snap Use the upper Freedom Ring for the top grommet of your flag Use the lower Freedom Ring (or large swivel ring) for the bottom grommet Once your flag is attached, raise your flagpole section by section, locking each into place Fly your flag high and proud—your Freedom Rings will keep it rotating freely 360° with the wind, tangle-free and dignified For Two Flags: Connect top flag's top grommet to its own swivel ring at the top of the flagpole; attach the bottom grommet to the top clip on the Duo Harness (Double Flag Harness) then add the second flag top brass grommet to the bottom clip of the Duo Harness and bottom grommet to the lower swivel ring. For Half-Staff: Secure the top grommet of your U.S. flag to the lower swivel ring and use the half-staff Duo Harness for proper etiquette. Why Customers Choose Freedom Rings Eliminates rope noise, tangling, and flag wrapping Extends the lifespan of your flags by reducing fabric stress Built from aircraft-grade Lexan® to withstand year-round weather Designed specifically for Phoenix Flagpoles, but also compatible with other telescoping poles with matching inside diameters ✅ Fits Phoenix Telescoping Flagpoles (15', 20', 25') ✅ Compatible with any pole featuring 1 ¾" & 2 ¼" ring diameters ✅ Available in 3 colors to match your pole finish ✅ Backed by our Lifetime Warranty Troubleshooting Guide Q: My Freedom Ring feels stiff or doesn't rotate smoothly. • Check that the ring is clipped fully shut. • Wipe the ring with a damp cloth to remove dust, grit, or pollen. • Apply a light silicone spray (never oil-based lubricants) around the swivel point if rotation feels tight. Q: My flag keeps wrapping around the pole. • Make sure both the top and bottom grommets are clipped to Freedom Rings. • Check that the rings are not too close together — space them properly for your flag size. • If flying two flags, ensure each has its own swivel ring on top. Q: Can I replace a Freedom Ring if one breaks? • Yes. Freedom Rings are removable and replaceable. Simply collapse your flagpole, pry open the ring at the snap eyelet, slide it off, and install a new one following the same steps above. • Remember, all Freedom Rings are covered by Atlantic Flag & Pole's Lifetime Warranty. Q: My Freedom Rings got dirty or faded over time. How do I clean them? • Wash with warm water and mild soap. • Avoid harsh chemicals or abrasives, which may scratch the Lexan® finish. Warranty Information If you have purchased a Phoenix Telescoping Flagpole from this site and in the rare event that you have a particular section of the flagpole needs a swivel ring replaced, you can order replacement interlocking sleeves which will be the correct size and color. If you are our customer, these parts are free and are covered by our lifetime ltd. warranty. You only pay shipping & handling to get these parts to your doorstep. We also include step by step instructions to help you in changing out these parts. You must contact us via email or through our support ticket system for proper verification before ordering or you will not receive the warranty discount. We will send you a valid coupon code after confirmation of status or create a specialty invoice for you.

This is one Stainless Steel Spring Clip. It is an exact replacement for the spring clips used on our telescoping flagpoles.

Parts Description: Phoenix Telescoping Flagpole Replacement Guide For Phoenix Flagpoles and compatible telescoping flagpoles with similar dimensions.   If you own a Phoenix Telescoping Flagpole and encounter an issue where a specific section of the flagpole does not lock securely in place, replacement Secur-LOK™ sleeves are available in the correct size and color to resolve the problem.   To ensure you order the correct replacement part, please refer to the size guide below and use the accompanying diagram for assistance. We also provide detailed, step-by-step instructions to help you easily replace the parts and restore your flagpole’s functionality.   Replacement Sleeve Size Guide   For Phoenix Telescoping Flagpoles with 4 Sections, 20’ and 25’ in height (3 Joints): • From the Ground Up: • 3.0″ – 1st Joint • 2.5″ – 2nd Joint • 2.0″ – 3rd Joint   For Phoenix Telescoping Flagpoles with 3 Sections 15’ and 18’ in height (2 Joints): • From the Ground Up: • 2.5″ – 1st Joint • 2.0″ – 2nd Joint   If you need additional assistance or have questions about ordering or replacing parts, please contact our support team. We’re here to ensure your Phoenix Telescoping Flagpole continues to perform at its best. If you have purchased a Phoenix Telescoping Flagpole from this site and in the event that you have a particular section of the flagpole that will not lock in place, you can order replacement interlocking sleeves which will be the correct size and color. If you are our customer, these parts are free and are covered by our lifetime ltd. warranty. You only pay shipping & handling to get these parts to your doorstep. We also include step by step instructions to help you in changing out these parts. You must contact us via email or through our support ticket system for proper verification before ordering or you will not receive the warranty discount. We will send you a valid coupon code after confirmation of status or create a specialty invoice for you.