Freedom Ring 360° Swivel Replacement KitFor Telescoping Flagpoles

Phoenix Flagpole Freedom Rings – 360° Swivel Flag Attachment

Lexan® Plastic – Strong, impact-resistant swivel rings

360° Rotation – Keeps flags from tangling & twisting

Sizes: 1 ¾″ (small/double), 2 ¼″ (large)

Colors: Black Bronze, Light Bronze/Gold, Silver

Compatible with Phoenix Flagpoles (15’, 20’, 25’) + other poles with the same dimensions

Lifetime Warranty – Built to last, covered by the Limited Lifetime Forever™ Warranty on covered components

Phoenix Flagpole Freedom Rings – 360° Swivel Flag Attachment (Lexan®)

Keep your flag flying free and untangled with Phoenix Flagpole Freedom Rings, the ultimate swivel flagpole hardware designed for Phoenix Telescoping Flagpoles and any flagpole with the same dimensions. Made from impact-resistant Lexan® plastic, these rings allow your flag to rotate 360° in the wind, preventing wrapping, tearing, and premature wear.

Product Features & Specifications:

• Material: High-strength Lexan® polycarbonate plastic for weather resistance & durability.
• Sizes:
• Small & Double Swivel Rings – 1 ¾” inside diameter
• Large Swivel Ring – 2 ¼” inside diameter
• Colors Available:Black Bronze, Light Bronze/Gold, Silver – match your Phoenix Flagpole finish perfectly.
• 360° Freedom Rotation: Keeps flags flying freely without tangling or twisting.
• Fly Two Flags or Half-Staff: Double swivel ring system allows for multiple flag display or proper half-staff positioning.
• Universal Compatibility: Fits all Phoenix Telescoping Flagpoles (15’, 20’, 25’) and other telescoping poles with matching diameters.
• Limited Lifetime Forever™ Warranty: swivel rings are a covered component for the original owner of a Phoenix flagpole.

Easy Installation Instructions:

Phoenix Flagpole Freedom Rings – Installation & Troubleshooting Guide

1. Lower or collapse your Phoenix Telescoping Flag pole until you reach the section where you want to attach your Freedom Ring.
2. Pry open the Freedom Ring at the flag snap eyelet and slide the ring over the flagpole tube section until it claps shut securely.
3. Attach the stainless steel flag snap: Press the spring clip of the stainless steel snap over the Freedom Ring’s eyelet until it snaps firmly into place.
4. Clip your flag grommet onto the flag snap.
• Use the upper Freedom Ring for the top grommet of your flag.
• Use the lower Freedom Ring (or large swivel ring) for the bottom grommet.
5. Once your flag is attached, raise your flagpole section by section, locking each into place.
6. Fly your flag high and proud—your Freedom Rings will keep it rotating freely 360° with the wind, tangle-free and dignified.

For Two Flags: Connect top flag’s top grommet to its own swivel ring at the top of the flag pole; attach the  bottom grommet to the top clip on the Duo Harness (Double Flag Harness) then add the Second flag top brass grommet to the bottom Clip of the Duo Harness and bottom grommet to the lower swivel ring.

For Half-Staff: Secure the top grommet of your U.S. flag to the lower swivel ring and use the half-staff Duo Harness for proper etiquette.

Why Customers Love Freedom Rings:

• Eliminates rope noise, tangling, and flag wrapping
• Extends the lifespan of your flags by reducing fabric stress
• Built from aerospace-grade Lexan® to withstand year-round weather
• Designed specifically for Phoenix Flagpoles, but also compatible with other telescoping poles with matching inside diameters

Fits Phoenix Telescoping Flagpoles (15’, 20’, 25’)

Compatible with any pole featuring 1 ¾″ & 2 ¼″ ring diameters

Available in 3 colors to match your pole finish

Backed by our Lifetime Warranty

Troubleshooting Guide

Q: My Freedom Ring feels stiff or doesn’t rotate smoothly.

•Check that the ring is clipped fully shut.

•Wipe the ring with a damp cloth to remove dust, grit, or pollen.

•Apply a light silicone spray (never oil-based lubricants) around the swivel point if rotation feels tight.

Q: My flag keeps wrapping around the pole.

•Make sure both the top and bottom grommets are clipped to Freedom Rings.

•Check that the rings are not too close together — space them properly for your flag size.

•If flying two flags, ensure each has its own swivel ring on top.

Q: Can I replace a Freedom Ring if one breaks?

•Yes. Freedom Rings are removable and replaceable. Simply collapse your flagpole, pry open the ring at the snap eyelet, slide it off, and install a new one following the same steps above.

•Remember, all Freedom Rings are covered by Atlantic Flag & Pole’s Lifetime Warranty .

Q: My Freedom Rings got dirty or faded over time. How do I clean them?

•Wash with warm water and mild soap.

•Avoid harsh chemicals or abrasives, which may scratch the Lexan® finish.

⸻

Quick Notes for Customers:

•Works with all Phoenix Telescoping Flagpoles (15’, 20’, 25’)

•Compatible with other flagpoles that match 1 ¾″ and 2 ¼″ diameters

•Backed by Lifetime Warranty for peace of mind